Restoring Settings To The Defaults; Video And Audio - Insignia NS24D310NA17OM User Manual

Restoring settings to the defaults

When you restore default settings, all the settings you
have customized (except parental controls) are reset.
1 Press MENU.
2 Press or to highlight HELP, then press
ENTER.
3 Press or to highlight Reset to Default, then
press ENTER or .
4 Press or to select OK (to reset) or Cancel (to
not reset), then press ENTER.
If you select OK, your TV turns off, then turns on
again. Go through the Easy Setup wizard. For more
information, see
time on page 30.
OR
If you select Cancel or press MENU, your TV
returns to the Help menu without making any
changes.
OR
If you press EXIT, the on-screen menu closes
without making any changes.
Turning on your TV for the first
www.insigniaproducts.com

Video and audio

Problem
Picture does
not fill the
or
screen. There
are black bars
around the
picture.
No picture
(screen is not
lit) and no
sound.
24" 720p 60Hz LED TV
Solution
• Change the aspect ratio. See the
Aspect Ratio option in
the TV picture on page 40.
• Press on the TV or the remote
control.
• Make sure that the Audio Only
option is set to Off. See
audio only on page 44.
• Make sure that the video cables are
connected correctly and securely
to your TV.
• Adjust the contrast and brightness.
See Adjusting the TV picture
page 40.
• Make sure that the power cord is
plugged into a working outlet.
• Press INPUT and make sure that the
correct video input source is
selected. See Selecting the video
input source on page 32.
• Try another channel. The station
may be experiencing problems.
• Make sure that the incoming signal
is compatible.
• Make sure that the antenna or cable
TV is connected correctly and
securely. See Connecting a cable or
satellite box on page
Connecting an antenna or cable TV
(no box) on page 16.
• Check the closed caption settings.
Some TEXT modes can block the
screen. See Using closed captioning
on page 52.
Adjusting
Playing TV
on
13 or
61