Kodak Scanmate i1120 User Manual page 12

Connecting the power cord
and USB cable
A-61602 February 2009
When the drivers have been installed, connect the power supply, power
cord and USB cable to the scanner. Refer to the illustration below for
making proper connections. Make sure the power outlet is located
within 1.52 metres (5 feet) of the scanner and is easily accessible.
1. Select the appropriate AC power cord for your region from the
supply of power cords packed with your scanner.
2. Attach the power cord for your power type to the power supply.
NOTE: Be sure that the power cord is securely attached to the
power supply.
3. Plug the output power cord from the power supply into the power
port on the scanner.
4. Plug the other end of the power cord into the wall outlet.
5. Attach the USB cable to the scanner USB port, located on the back
of the scanner.
6. Attach the other end of the USB cable to the proper USB port on
your PC.
NOTE: If you installed a USB card, use one of those ports, or use your
PC's USB port. See your PC manufacturer's documentation for
the location of the USB port.
2-5