Kodak i4600 Supplementary Manual page 21

20
Response — indicates the action that will be taken when the document
feeder timeout has been reached.
• Stop Scanning: scanning will stop and control will return to the
scanning application (i.e., ends the job).
• Pause Scanning: scanning will stop but the scanning application will
be waiting for additional images (i.e., stops the feeder). Scanning
may be resumed by pressing the Start/Resume button on the
scanner. Scanning may be stopped by pressing the Stop/Pause
button on the scanner or via the scanning application.
Stacker — allows you to select how the scanner transports documents
through the scanner. This affects how the documents are fed into the
scanner, how fast they move through the scanner, and how they are
placed in the output tray.
• Normal: no additional handling is performed. Best used when all
documents are similar in size.
• Improved Stacking: aids in controlling how the documents are
stacked/ordered in the output tray for mixed document sets. This
should work for the majority of mixed sets.
• Best Stacking: when your document set contains a great variability
in size, this option provides the best control of how the documents
are stacked/ordered within the output tray.
• Special: for irregularly shaped documents (e.g., pages with coupons
removed or documents with large holes or cutouts in them).
Longest Document — enter a value that indicates the length of the
longest document in your document set.
NOTES:
• Changing this value will affect the maximums for the following
settings: Area - Width; Height; Printer - Offset From Lead Edge;
Multifeed - Length Detection.
• Not all combinations of settings are supported at the larger lengths
(i.e, resolution, color, grayscale, etc.). To allow for greater flexibility
with applications, the scanner will not generate an error until it sees a
document whose length is not supported.
• The scanner's throughput may be reduced for larger lengths.
Power Saver — allows you to set the amount of time (0 to 60 minutes)
the scanner will remain inactive before the scanner goes into an idle
state. The default is 15 minutes.
A-61654/ISIS December 2009