Kodak HERO 9.1 Extended User Manual page 100

Faxing
Connecting to an
Internet or cable
telephone service
(Voice-Over-Internet
Protocol or VOIP)
94
If you have an Internet or cable (Voice-Over-Internet Protocol or VOIP) telephone
service, you should already have a cable modem/router connected to the cable
outlet with a coaxial cable. You will also need an Analog Telephone Adapter (ATA) to
connect your printer for faxing.
NOTE: Sometimes the cable modem/router has a built-in ATA. Contact your cable
telephone service provider for more information.
1. Connect an RJ-45 (also called CAT 5) cable from the cable modem/router to the
WAN port on the Analog Telephone Adapter (ATA).
2. Connect one end of the phone cord that came with the printer (RJ-11 telephone
cord) to one of the phone input ports on the ATA and the other end to the LINE
IN port on the back of your printer.
Cable outlet
Cable
modem/router
Coaxial
cable
RJ-45 cable
(CAT 5 cable)
www.kodak.com/go/aiosupport
RJ-11
telephone cord
Analog Telephone
Adapter (ATA)