Receiving A Fax; Receiving A Fax Automatically; Receiving A Fax Manually - Kodak HERO 9.1 Extended User Manual

Receiving a fax

Receiving a fax automatically

Receiving a fax manually

You can set up your printer to receive faxes automatically or manually. Even if your
printer is set up to receive faxes automatically, you can still receive them manually at
any time.
To receive faxes automatically:
1. Load letter (8.5 x 11 in. / 22 x 28 cm) or A4 (8.3 x 11.7 in. / 21 x 30 cm) plain
paper into the main paper tray (see
page 42).
2. Make sure the Auto-Answer is set to On (see
answer or manual), page
The printer will receive all incoming faxes automatically.
Whenever there is an incoming fax, the printer LCD shows the message,
IMPORTANT:
"Incoming Call. (Name and number if available)." When Auto-Answer is
turned on, you do not need to touch Answer now on the LCD to receive the
fax. The printer will automatically receive the fax after the number of rings
that you selected (see
to receive the fax sooner by touching Answer now on the LCD. (Whether the
fax is color or black and white is determined by the sender.)
If Auto-Answer is turned off, you can receive incoming faxes manually. You can
receive any incoming fax manually, even if Auto-Answer is turned on.
To receive a fax manually:
• When you hear the phone ring, touch Answer now on the LCD.
If your printer is connected to the same phone line as another telephone and you are
using tone dialing (see
manually from another phone. When you hear the distinctive ring of your fax line or
know that the incoming call is a fax:
• Pick up any phone and dial 234 (the remote access code).
www.kodak.com/go/aiosupport
Loading paper in the main paper tray,
101).
Rings to Answer, page
Dialing Mode, page 99), you can receive an incoming fax
KODAK HERO 9.1 All-in-One Printer
Setting the answer mode (auto
97). However, you may choose
107