1
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 DISASSEMBLY
A
-
Removing the Grille Assy (Fig.1)
Monitor section is drawn out forward.
1
Remove the two screws and then remove
the Holder.
Disconnect the connector.
2
Remove the two screws and then remove
the Grille Assy.
B
-
Removing the Case
3
Remove the five screws.(Fig.1)
4
Remove the screw.(Fig.1)
5
Remove the two screws and then remove
the Case.(Fig.1)
C
Note) Inside the product there is a flexible substrate
that connects the Case and the Bracket.
Be very careful and do not give it a strong pull
when removing the Case, otherwise it may
be torn.
-
Removing the DVD Mechanism Module (Fig.2)
1
Remove the four screws.
D
Disconnect the connector and then remove the
DVD Mechanism Module.
E
F
152
1
2
3
4
3
3
2
Case
1
1
DVD Mechanism Module
AVH-P5750DVD/RC
2
3
5
1
1
Holder
Grille Assy
3
4
5
3
3
2
Fig.1
1
1
Fig.2
4