Table of Contents
Advertisement
3G
3G setup interface is shown as below.
Please refer to the following contents for the parameter information.
Pane 1: Display 3G signal intensity after you enabled 3G function.
Pane 2: Display 3G module configuration information after you enabled 3G
function.
Pane 3: Display 3G module status information after you enabled 3G function.
It is to display current wireless network signal intensity such as WCDMA,
EDGE and etc.
3G module: It is to display current wireless network adapter name.
3G Enable/Disable: Check the box here to enable 3G module.
Network type: There are various network types for different 3G network
modules. You can select according to your requirements.
APN: It is the wireless connection server. It is to set you access the wireless
network via which method.
AUTH: It is the authentication mode. It supports PAP/CHAP.
Dial number: Please input 3G network dialup number you got from your ISP.
User name: It is the user name for you to login the 3G network.
Password: It is the password for you to login the 3G network.
1
2
73
Advertisement
Table of Contents
