Specifications; Warranty - Metcal MFR-1300 Series User Manual

Specifications

Ambient Operating Temperature
Maximum Enclosure Temperature
Input Line Voltage
Input Line Frequency
Power Consumption
Output Power
Output Frequency
Power Cord 3-Wire
Dimensions w x d x h
Certification / Marking
Tip-to-Ground Potential
Tip-to-Ground Resistance
Idle Temperature Stability
Desolder Hand-piece Cable Length
Other Hand-piece Cable Length
Hand-piece Connector
Workstand Dimensions w x d x h

Warranty

Please visit OK International's web page (www.metcal.com) where you will find available
information on systems, accessories, technical notes, and more.
OK International warrants the MFR-PS1300 against any defects in materials or workmanship
for one (1) year from the date of purchase by the original owner. This Warranty excludes
normal maintenance and shall not apply to any opened, misused, abused, altered or damaged
items. If the product should become defective within the warranty period, OK International will
repair or replace it free of charge at its sole option. The repaired or replacement item will be
shipped, freight prepaid, to the original purchaser. The warranty period will start from the date of
purchase. If the date of purchase cannot be substantiated the date of manufacture will be used
as the start of the warranty period.
The MFR-H5-DS hand-piece uses a coil assembly which is a consumable item. OK
International warrants the coil assembly against material and workmanship defects for a period
of 30 days. For contact details for Warranty and Support look for your local office details at:
www.metcal.com
10 - 40°C (50 - 104°F)
55°C (131°F)
100- 240 VAC, grounded circuit
50/60 Hz
110 Watts max. (MFR-PS1300)
60 Watts max. at 22°C (71°F) ambient temperature
450 kHz
183cm (72") (18/3) SJT
170mm (7") x 200mm (8") x 152.5mm (6")
cTUVus, CE
<2mV
<2 ohms
± 1.1°C (34°F) in still air
L=152cm (60"), burn proof, ESD safe
L=122cm (48"), burn proof, ESD safe
8-pin circular DIN
100 mm (4") x 200 mm (8") x 100 mm (4")
8