In The Dcs Acquire Module Or Dcs Twain Data Source - Kodak DCS 330 User Manual

In the DCS Acquire Module or DCS TWAIN Data Source

You can set a preference in the DCS Acquire Module or DCS TWAIN Data Source that
determines whether the sharpening feature is applied to images acquired from your DCS
330 camera. The choices for this preference are:
At Capture (default setting)—Images are sharpened if the camera's Antialiasing
Filter property was set to Installed.
On—Images are always sharpened.
Off—Images are never sharpened.
1
Start the DCS Acquire Module
or DCS TWAIN Data Source.
Refer to the Readme or the
KODAK PROFESSIONAL
DCS Host Software User's
Manual on the CD included with
your camera.
2
Click the Preferences Icon.
The Preferences dialog box
appears.
3
Choose At Capture, On, or Off
from the Sharpen Images list
box.
4
Choose High, Medium, or Low
from the Level list box—(the
higher the level, the more
Sharpening).
35