Software Update; Resetting The Device's Network Settings; Remote Diagnosis; Protection Of Personal - Siemens WM14VMH0NL User Manual And Installation Instructions

Table of Contents

Advertisement

Remark: If the WiFi is deactivated and
your device was previously connected
to your home network, the
connection is automatically re-
established when the WiFi is switched
on again.

15.7 Software update

Required: The display shows UPd
displayed.
Approx. 3 s onControl via app
1.
know.
Set program to position 6.
2.
a The display shows UPd.
on Start/Refill
3.
a The software update is installed
learned.
a If the display end shows, is the
software update installed.
Remark: The software update may
take several minutes. Do not turn off
the device during software updates.
15.8 Resetting the device's
network settings
On for at least 3 seconds Operate
1.
via app
to press.
Set program to position 5.
2.
a The display shows rES reflected
to give.
on Start/Refill
3.
a The display shows YES reflected
to give.
on Start/Refill
4.
a The network settings are
set back.
a If the display end shows, are the
network settings reset.
pressure-
to press.
to press.
to press.
Tip: If you want to operate your
appliance again via the Home
Connect app, you must reconnect it
to the home network and the Home
Connect app.

15.9 Remote Diagnosis

Customer service can access your
device via remote diagnosis if you
contact customer service with the
appropriate request, your device is
connected to the Home Connect
server and the remote diagnosis is in
the country in which you are using
the device is available.
Tip: More information as well as
hints on the availability of remote
diagnosis in your country can be
found in the service/support section
of the local website: www.home-
connect.com
15.10 Protection per-
personal data
Please observe the instructions
regarding the protection of personal

data.

When your appliance is connected to
a home network connected to the
Internet for the first time, it transmits
the following categories of data to the
Home Connect server (first
registration):
¡ Unambiguous identification of the device
ready (consisting of device keys
and the MAC address of the built-
in
Wi-Fi communication module).
¡ Wi-Fi . Security Certificate
communication module (for
information security of the
connection).
¡ The current software and hardware
version of your home appliance.
Home Connect
47
NL

Advertisement

Table of Contents
loading

Table of Contents