Table of Contents
Advertisement
NL Troubleshooting
Malfunction
flashes.
All other error codes. Malfunction
Device not working.
Program does not start.
Door cannot be
opened.
60
Cause and Troubleshooting
Door is not closed.
Close the door.
1.
To start the program, press Start/Additional
2.
.
to fill
Please contact customer service.
▶
→ "Service", Page 69
Mains plug of the power cable is not plugged in.
Connect the appliance to the mains.
▶
Fuse is defective.
Check the fuse in the meter box.
▶
Power supply has failed.
Check whether the interior lighting or
▶
other devices are functioning.
Start/Refill
Press Start/Refill
▶
Door is not closed.
Close the door.
1.
To start the program, press Start/Additional
2.
.
to fill
Child lock is activated.
→ " Deactivate child lock", page 43
▶
is activated.
- Ready in +
Check if - Ready in +
▶
→ "Keys", Page 23
Laundry is wedged in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
To start the program, press Start/Additional
4.
.
to fill
is activated.
Resume the program by Centrifuge or off-
▶
pumps to choose and press Start/Refill
to press.
→ "Resume program on rinse hold", Page 42
Temperature is too high.
Wait for the temperature to drop.
▶
→ " program cancel", Page 42
▶
was not pressed.
.
is activated.
at
Advertisement
Table of Contents
