Table of Contents
Advertisement
Open the Home Connect app on the
5.
mobile end device and follow the
steps in the app.
Enter the network name (SSID)
6.
and password (Key) of your home
network in the Home Connect
app.
Follow the steps in the Home
7.
Connect app to connect the
appliance.
aWhen the display shows
displayed and permanent
lights up, the device is
connected to the home network.
When on the display err is
8.
displayed, the device is not
connected to the home network.
Check whether your device is
-
within range of the home
network.
Reconnect the device to WLAN
-
home network (WiFi) with WPS
function.
Connecting the appliance to the
9.
Home Connect app → Page 45.
15.3 Connecting the appliance to
the Home Connect app
Requirements
¡ The device is connected to the
WiFi home network.
¡ The Home Connect app is open
and you have signed up.
Set the program to level 3.
1.
a The display shows APP reflected
to give.
Press Start/Refill
2.
a The device is connecting
with the Home Connect app.
As soon as the device is in the Ho-
3.
me Connect app is displayed,
follow the last steps in the Home
Connect app.
aWhen the display shows
the appliance is connected to the
Home Connect app.
15.4 Connecting the device
to the energy manager
When you connect the appliance to
the Smart Energy system (energy
manager), you optimize the energy
consumption. The device only starts
up when your own PV system
generates sufficient energy or when
the electricity tariff is favorable.
Requirements
¡ The Smart Energy System (Ener-
giemanager) uses the
communication standard of the
EEBus initiative.
¡ You have in the user manual
of the Smart Energy System (Energy
Manager) how the Smart Energy
System (Energy Manager) connects
to your appliance.
Approx. 3 s onControl via app
1.
know.
a The display shows auto reflected
to give.
Set program to position 7.
2.
a The display shows Spooky reflected
to give.
on Start/Refill
3.
Home Connect
.
pressure-
to press.
45
NL
Advertisement
Table of Contents
