Table of Contents
Advertisement
NL Cleaning and maintenance
Clean the sieve with a small brush.
2.
Connect the water inlet hose and
3.
check for leaks.
Cleaning the strainer on the device
Remark: Take the information on the
topic of safety → Page 4
and avoid material damage
→ Page 11 take care of your device
to use safely.
Required: The water supply hose is
empty.
→ "Empty water inlet hose",
Page 55
56
Detach the hose at the back of
1.
the device.
1
2
Remove the sieve with pliers.
2.
Clean the sieve with a small brush.
3.
Reinstall the filter.
4.
Advertisement
Table of Contents
