Removing The Palm Rest - Dell Inspiron 1525 Service Manual

Back to Contents Page
Palm Rest
Dell™ Inspiron™ 1525/1526 Service Manual

Removing the Palm Rest

CAUTION:
1. Follow the instructions in
2. Remove the center control cover (see
3. Remove the keyboard (see
4. Remove the internal card with Bluetooth wireless technology, if installed (see
NOTE:
5. Disconnect the button board cable from the system board.
6. Disconnect the speaker cable from the system board.
7. Remove the display assembly (see
8. Remove the nine screws from the bottom of the computer.
NOTE:
9. Turn the computer over and remove the two screws securing the top of the palm rest.
10. Disconnect the touch pad connector and the device status lights LED connector from the system board.
NOTICE:
move along the edge, working away from the area of resistance, until the palm rest is free.
Great user manuals database on
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
Before You Begin.
Removing the Center Control
Removing the Keyboard).
It is not necessary to remove the Bluetooth cable connector from the system board connector.
Removing the Display
The screw locations may vary slightly from the image shown below.
Do not use force to separate the palm rest from the computer. If you encounter resistance, gently flex or apply pressure to the palm rest, or
UserManuals.info
Cover).
Removing the Internal Card With Bluetooth® Wireless
Assembly).
Technology).