Table of Contents
Advertisement
1
securing clips (2)
Replacing Memory Module
NOTICE:
as a connector on the back of the computer).
1. Align the notch in the module edge connector with the tab in the connector slot.
2. Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the
module and reinstall it.
NOTE:
If the memory module is not installed properly, the computer may not boot. No error message indicates this failure.
1
tab
NOTICE:
3. Replace the memory module cover.
4. Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.
5. Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer, click Start
Back to Contents Page
Great user manuals database on
2
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
2
notch
If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.
UserManuals.info
memory module
® Help and Support® Dell System Information.
Advertisement
Table of Contents
