Removing The System Board - Dell XPS L502X Service Manual

Back to Contents Page
System Board
Dell™ XPS™ L502X Service Manual
Removing the System Board
Replacing the System Board
Entering the Service Tag in the BIOS
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
CAUTION:
Removing the System Board
1. Follow the instructions in
2. Remove the battery (see
3. Remove the module cover (see
4. Remove the memory module(s) (see
5. Remove the palm-rest assembly (see
6. Remove the keyboard (see
7. Remove the display assembly (see
8. Follow the instructions from
9. Disconnect the USB board cable and speaker cable from the connectors on the system board.
1 USB board cable connector
10. Turn the top cover over.
11. Remove the heat sink (see
12. Remove the processor module (see
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Handle components and cards by their edges, and avoid touching pins and contacts.
Before You Begin.
Removing the Battery).
Removing the Module
Removing the Memory
Removing the Palm-Rest
Removing the Keyboard).
Removing the Display
step 9 to step 14 in Removing the Top
2 speaker cable connector
Removing the Heat Sink).
Removing the Processor
UserManuals.info
Removing the
Cover).
Module(s)).
Assembly).
Assembly).
Cover.
Module).
Battery) before working inside the