Replacing The Palm-Rest Assembly - Dell XPS L502X Service Manual

1 plasric scribe
3 palm-rest assembly
CAUTION:
7. Without pulling hard on the palm-rest assembly, place it away from the display as shown in the following illustration.
8. Lift the connector latches and pull the pull-tabs to disconnect the touch- pad cable and the power button cable from their system-board connectors.
9. Lift the palm-rest assembly off the top cover.
1 power-button cable connector
3 palm-rest assembly
Replacing the Palm-Rest Assembly
1. Follow the instructions in
2. Slide the touch-pad cable and the power button cable into their system-board connectors and press down on the connector latches to secure the
cables.
3. Align the tabs on the palm-rest assembly with the slots on the top cover and gently snap the palm-rest assembly into place.
4. Close the display and turn the computer over.
5. Replace the screw that secures the palm-rest assembly to the base cover.
6. Replace the battery (see
CAUTION:
result in damage to the computer.
Back to Contents Page
Great user manuals database on
2 top cover
Carefully separate the palm-rest assembly from the top cover to avoid damage to the palm-rest assembly.
2 touch-pad cable connector
Before You Begin.
Replacing the Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
UserManuals.info