Back to Contents Page
Power-Button Board
Dell™ XPS™ L502X Service Manual
Removing the Power-Button Board
Replacing the Power-Button Board
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Power-Button Board
1. Follow the instructions in
2. Remove the battery (see
3. Remove the palm-rest assembly (see
4. Turn the palm-rest assembly over.
5. Lift the connector latch and pull the pull-tab to disconnect the power-button cable from the connector on the power-button board.
6. Remove the two screws that secure the power-button board to the palm-rest assembly.
7. Lift the power-button board off the palm-rest assembly.
1
power-button board
3
screws (2)
Replacing the Power-Button Board
1. Follow the instructions in
2. Place the power-button board on the palm-rest assembly and replace the two screws that secure the power-button board to the palm-rest assembly.
3. Slide the power-button cable into the connector on the power-button board and press down on the connector latch to secure the power-button cable.
4. Replace the palm-rest assembly (see
5. Replace the battery (see
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You
Begin.
Removing the
Battery).
Removing the Palm-Rest
2
power-button cable connector
Before You
Begin.
Replacing the Palm-Rest
Replacing the
Battery).
UserManuals.info
Removing the
Assembly).
Assembly).
Battery) before working inside the