Removing The Palm-Rest Assembly - Dell XPS L502X Service Manual

Back to Contents Page
Palm-Rest Assembly
Dell™ XPS™ L502X Service Manual
Removing the Palm-Rest Assembly
Replacing the Palm-Rest Assembly
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Palm-Rest Assembly
1. Follow the instructions in
2. Remove the battery (see
3. Remove the screw that secures the palm-rest assembly to the base cover.
4. Release and push the palm-rest assembly tabs off the base cover.
1 palm-rest assembly tabs (2)
3 base cover
5. Turn the computer over and open the display as far as possible.
6. Using a plastic scribe, gently ease the palm-rest assembly from the top cover.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
UserManuals.info
Removing the
2 screw
Battery) before working inside the