Removing The I/O Board; Replacing The I/O Board - Dell Inspiron N5010 Service Manual

Back to Contents Page
I/O Board
Dell™ Inspiron™ N5010/M5010 Service Manual
Removing the I/O Board
Replacing the I/O Board
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the I/O Board
1. Follow the instructions in
2. Remove the battery (see
3. Follow the instructions from
4. Remove the middle cover (see
5. Remove the I/O board from the latch on the computer base.
6. Lift the I/O board off the computer base.
1 I/O board
Replacing the I/O Board
1. Follow the instructions in
2. Align the connectors on the I/O board with the slots on the computer base and press the I/O board until it is seated fully.
3. Replace the middle cover (see
4. Follow the instructions from
5. Replace the battery (see
CAUTION:
result in damage to the computer.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
step 3 to step 13 in Removing the System
Removing the Middle
Before You Begin.
Replacing the Middle
step 6 to step 17 in Replacing the System
Replacing the Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
UserManuals.info
Removing the
Board.
Cover).
Cover).
Board.
Battery) before working inside the