8. Remove the keyboard (see
CAUTION:
9. Disconnect the touch pad cable, status light cable, and power button cable from the connectors on the system board.
10. Remove the five screws that secure the plam rest to the system board.
1
touch pad cable connector
3
palm rest
5
power button cable connector
CAUTION:
11. Slide a plastic scribe between the computer base and the palm rest and pry out the palm rest off the computer base.
1
palm rest
Replacing the Palm Rest
1. Follow the instructions in
2. Slide the tabs on the palm rest into the slots on the computer base and gently snap the palm rest into place.
3. Replace the five screws that secure the plam rest to the system board.
4. Connect the touch pad cable, status light cable, and power button cable to the connectors on the system board.
Great user manuals database on
Removing the
Keyboard).
To avoid damage to the connectors, lift the connector latch and then remove the cables.
2
screw
4
status light cable connector
Carefully separate the palm rest from the computer base to avoid damage to the palm rest.
2
plastic scribe
Before You
Begin.
UserManuals.info