Replacing The System Board; Entering The Service Tag In The Bios - Dell Inspiron N5010 Service Manual

5 speaker cable connector
13. Lift the system board assembly to disconnect connector on the system board from the connector on the I/O board and lift the system board assembly off
the computer base.
14. Turn the system board assembly over.
15. Remove the coin-cell battery (see
16. Remove the processor heat sink (see
17. Remove the processor module (see
Replacing the System Board
1. Follow the instructions in
2. Replace the processor module (see
3. Replace the processor heat sink (see
4. Replace the coin-cell battery (see
5. Turn the system board assembly over.
6. Align the connectors on the system board with the slots on the computer base.
7. Gently press the system board to connect the connector on the system board to the connector on the I/O board.
8. Replace the two screws that secure the system board assembly to the computer base.
9. Connect the display cable, VGA connector board cable, speaker cable, and Media Card Reader board cable to the connectors on the system board.
10. Replace the Bluetooth module (see
11. Replace the Mini-Card (see
12. Follow the instructions in
13. Replace the palm rest (see
14. Replace the keyboard (see
15. Replace the optical drive (see
16. Replace memory module(s) (see
17. Replace the base cover (see
18. Replace the battery (see
CAUTION:
result in damage to the computer.
19. Turn on the computer.
NOTE: After you have replaced the system board, enter the computer Service Tag in the BIOS of the replacement system board.
20. Enter the service tag (see
Entering the Service Tag in the BIOS
Great user manuals database on
6 system board assembly
Removing the Coin-Cell
Removing the Processor Heat
Removing the Processor
Before You Begin.
Replacing the Processor
Replacing the Processor Heat
Replacing the Coin-Cell
Replacing the Bluetooth
Replacing the Mini-Card).
step 4 and step 5 in Replacing the Hard
Replacing the Palm Rest).
Replacing the Keyboard).
Replacing the Optical
Replacing the Memory
Replacing the Base Cover).
Replacing the Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
Entering the Service Tag in the
UserManuals.info
Battery).
Sink).
Module).
Module).
Sink).
Battery).
Module).
Drive.
Drive).
Module(s)).
BIOS).