Removing The Battery; Replacing The Battery - Dell Studio 1450 Service Manual

Back to Contents Page
Battery
Removing the Battery
Replacing the Battery
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
CAUTION:
other Dell computers.
Removing the Battery
1. Follow the procedures in
2. Turn the computer over.
3. Slide the battery release latch until it clicks into place.
4. Slide the battery out of the battery bay.
1 battery
Replacing the Battery
To replace the battery, slide the battery into the battery bay until it clicks into place.
Back to Contents Page
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
To avoid damage to the computer, use only the battery designed for this particular Dell™ computer. Do not use batteries designed for
Before You Begin.
2 battery release latch
UserManuals.info