Removing The Optical Drive - Dell Studio 1450 Service Manual

Hide thumbs Also See for Studio 1450:
Table of Contents

Advertisement

Back to Contents Page
  Optical Drive
  Removing the Optical Drive
  Replacing the Optical Drive
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
surface (such as a connector on your computer).
 
CAUTION:
is not covered by your warranty.
 
CAUTION:
computer.
 Removing the Optical Drive
 
1. Follow the instructions in
 
2. Remove the battery (see
 
3. Remove the base cover (see
 
4. Remove the memory modules (see
 
5. Remove the hard drive (see
 
6. Remove any installed Mini-Cards (see
 
7. Remove the screw that secures the optical drive to the computer base.
1
 
8. Remove the keyboard (see
 
9. Remove the palm rest (see
 
10. Remove the screw that secures the optical drive to the system board.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
To help prevent damage to the system board, remove the main battery (see
Before You
Begin.
Removing the
Battery).
Removing the Base
Cover).
Removing the Memory
Removing the Hard
Drive).
Removing the
screw
Removing the
Keyboard).
Removing the Palm
Rest).
UserManuals.info
Removing the
Module(s)).
Mini-Card).
Battery) before working inside the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studio 1457Studio 1458

Table of Contents