Removing The Processor; Replacing The Processor - Dell Latitude E6510 Service Manual

Hide thumbs Also See for Latitude E6510:
Table of Contents

Advertisement

Back to Contents Page
Processor
Dell™ Latitude™ E6510 Service Manual
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Processor

NOTE:
You may need to install Adobe™ Flash Player™ from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
2. Remove the battery.
3. Remove the
4. Remove the
5. Turn the cam screw counter-clock wise until it comes to a stop to release the processor from the system board.
6. Carefully lift the processor up from its slot on the system board and remove the processor from the computer.

Replacing the Processor

CAUTION:
module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor and socket.
To replace the processor, perform the above steps in reverse order.
Back to Contents Page
 
 
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Before Working Inside Your
access
panel.
heat sink and fan
assembly.
While replacing the processor, ensure that the cam lock is in the fully open position before seating the processor module. A processor
UserManuals.info
Computer.

Advertisement

Table of Contents
loading

Table of Contents