Table of Contents
Advertisement
3
Chapter
Stitch Chart
■ Utility stitches
Applications, stitch lengths and widths and whether the
twin needle can be used, are listed for utility stitches in the
following table.
Memo
• When any of the following stitches (reverse stitch
patterns and reinforcement stitch patterns) are
selected, pressing
sew reverse stitches.
No.
1-01
Stitch
No.
1-09
Stitch
No.
1-13
Stitch
No.
1-31
Stitch
When any other stitch is selected, pressing
(Reverse stitch button) will sew reinforcement
stitches.
• The stitch pattern symbols indicate the following.
b
1 Left needle position
2 Middle (center) needle position
3 Right needle position
4 Reverse stitch pattern
5 Reinforcement stitch pattern
*1
Twin needle can be used by attaching zigzag foot "J".
VARIOUS STITCHES
(Reverse stitch button) will
1-02
1-03
1-04
1-10
1-11
1-12
1-14
1-29
1-30
1-33
e
e
Stitch
Stitch name/
(Presser
No.
Applications
foot)
Straight stitch (Left)
1-01
General sewing, gather,
pintuck, etc.
(J)
Straight stitch (Left)
1-02
General sewing, gather,
pintuck, etc.
(J)
Straight stitch
*1
(Middle)
1-03
General sewing, gather,
(J)
pintuck, etc.
Straight stitch
*1
(Middle)
1-04
General sewing, gather,
(J)
pintuck, etc.
Triple stretch stitch
General sewing for
1-05
reinforcement and
(J)
decorative topstitching
*1
Stem stitch
Reinforced stitching,
1-06
sewing and decorative
(J)
applications
Decorative stitch
1-07
Decorative stitching, top
stitching
(N)
Basting stitch
For basting.
If the basting threads fall
out of the fabric, pull up
the bobbin thread before
sewing, and then pull
the upper thread and
bobbin thread under the
presser foot toward the
back of the machine
(page 21). Hold the
1-08
upper thread and
bobbin thread when
(J)
beginning to sew, and
when finished sewing,
cut the threads leaving
an excess amount of
thread.
Finally, hold the upper
thread and bobbin
thread at the beginning
of the stitching while
arranging the fabric.
*1
Zigzag stitch
1-09
For overcasting,
mending.
(J)
*1
Zigzag stitch
1-10
For overcasting,
mending.
(J)
Stitch Chart
Stitch
Stitch
width
length
(mm (inch))
(mm (inch))
Auto.
Auto.
Manual
Manual
*1
0.0 (0)
2.5 (3/32)
0.0 - 7.0
0.2 - 5.0
(0 - 1/4)
(1/64 - 3/16)
*1
0.0 (0)
2.5 (3/32)
0.0 - 7.0
0.2 - 5.0
(0 - 1/4)
(1/64 - 3/16)
3.5 (1/8)
2.5 (3/32)
0.0 - 7.0
0.2 - 5.0
(0 - 1/4)
(1/64 - 3/16)
3.5 (1/8)
2.5 (3/32)
0.0 - 7.0
0.2 - 5.0
(0 - 1/4)
(1/64 - 3/16)
*1
0.0 (0)
2.5 (3/32)
0.0 - 7.0
0.4 - 5.0
(0 - 1/4)
(1/64 - 3/16)
1.0 (1/16)
2.5 (3/32)
0.0 - 7.0
0.4 - 5.0
(0 - 1/4)
(1/64 - 3/16)
*1
0.0 (0)
2.5 (3/32)
0.0 - 7.0
0.4 - 5.0
(0 - 1/4)
(1/64 - 3/16)
20 (3/4)
0.0 (0)
5 - 30
0.0 - 7.0
(3/16 - 1-3/
(0 - 1/4)
16)
3.5 (1/8)
1.4 (1/16)
0.0 - 7.0
0.0 - 5.0
(0 - 1/4)
(0 - 3/16)
3.5 (1/8)
1.4 (1/16)
0.0 - 7.0
0.0 - 5.0
(0 - 1/4)
(0 - 3/16)
39
3
Advertisement
Table of Contents
