Proper Disposal Of Your Old Refrigerator; Operating Your Refrigerator; Using The Controls - KitchenAid KRSC700HBS User Manual

PROPER DISPOSAL OF YOUR OLD REFRIGERATOR

WARNING
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.
IMPORTANT: Child entrapment and suffocation are not problems of
the past. Junked or abandoned refrigerators are still dangerous, even
if they will sit for "just a few days." If you are getting rid of your old
refrigerator, please follow these instructions to help prevent accidents.
Before You Throw Away Your Old Refrigerator or Freezer:
Take off the doors.
■
Leave the shelves in place so that children may not easily climb
■
inside.

Using the Controls

he refrigerator and freezer controls are located on the dispenser panel.
IMPORTANT: The display screen on the dispenser control panel
will turn off automatically and enter "sleep" mode when the control
buttons and dispenser pads have not been used for 2 minutes or
more. While in "sleep" mode, the first press of a control button will
only reactivate the display screen, without changing any settings.
Touch any control button on the dispenser panel to activate the
■
display screen. The home screen will appear as shown.
Adjusting the Controls
For your convenience, your refrigerator and freezer controls are
preset at the factory. When you first install your refrigerator, make
sure that the controls are still set to the "mid-settings." The factory
recommended set points are 37°F (3°C) for the refrigerator and 0°F
(-18°C) for the freezer.
IMPORTANT:
Wait 24 hours before you put food into the refrigerator. If you add
■
food before the refrigerator has cooled completely, your food may
spoil.
NOTE: Adjusting the set points to a colder than recommended
setting will not cool the compartments any faster.

OPERATING YOUR REFRIGERATOR

Calibrate Measured Fill
Important information to know about disposal of
refrigerants:
Dispose of refrigerator in accordance with Federal and Local
regulations. Refrigerants must be evacuated by a licensed,
EPA certified refrigerant technician in accordance with
established procedures.
If the temperature is too warm or too cold in the refrigerator or
■
freezer, first check the air vents to be sure they are not blocked
before adjusting the controls.
The preset settings should be correct for normal household usage.
■
The controls are set correctly when milk or juice is as cold as you
like and when ice cream is firm.
Wait at least 24 hours between adjustments. Recheck the
■
temperatures before other adjustments are made.
To view and adjust the set points, press and hold the TEMPERATURE
button for 3 seconds. When adjust mode is activated, adjusting
information will appear on the display screen.
NOTE: To view Celsius temperatures, press the LIGHT button when
adjust mode is activated. To return the display setting to Fahrenheit,
press LIGHT again.
When adjust mode is activated, the display screen shows the
■
refrigerator set point and "REFRIGERATOR" appears.
Press LOCK to raise the set point, or press OPTIONS to lower the
■
set point.
2
Calibrate Measured Fill