Required And Supplementary Documentations; Presentation Of Information; Safety Instructions - Bosch Rexroth 40 Series Operating Instructions Manual

1.2 Required and supplementary documentations

Please only commission the planetary gearbox once the documentation marked

with the book icon
read, understood and followed it.
Table 1 Required and supplementary documentations
Description
Material number-specific operating
instructions

1.3 Presentation of information

So that you can work with this documentation fast and with certainty when using
your planetary gearbox, uniform safety instructions, icons, terminology and
abbreviations are being used. For better understanding, these are explained in the
following sections.

1.3.1 Safety instructions

In this documentation, safety notes are located in chapter 2.6 "Product and
technology-dependent safety instructions" and in chapter 3 "General information
concerning damage to property and product damages", as well as before any
sequence of actions, or sequence of instructions, where there is a danger of
damage to persons or property. The measures described for avoiding hazards must
be observed.
The safety instructions are structured as follows:
Type and source of danger
Consequences in the case of non-compliance
 Measures for danger aversion
<List>

• Warning symbol: draws attention to the danger
• Signal word: identifies the degree of the danger
• Type and source of danger: identifies the type and source of danger
• Consequences: describes what occurs if the safety instructions are not complied
with
• Precautions: states how the danger can be avoided.
RE 79039-01-B/01.2021, MOBILEX GFB 8000 series 40 general operating instructions, Bosch Rexroth AG
About this documentation
has been made available to you and make sure you have
Document type
Operating instructions (included within
Rexroth's scope of supply)
SIGNAL WORD
7/64