Safety-Related Information; Correct Use; Warnings; Safety Notes - oventrop PT1000 Operating Instructions Manual

Temperature sensor PT1000
2.

Safety-related information

2.1

Correct use

Operating safety is only guaranteed if the product is
used correctly.
The temperature sensor PT1000 may be used for
water temperature measurement in the Oventrop
fresh water stations Regumaq X-25 and Regumaq
X-45.
Any other use of the product will be considered
incorrect use.
Claims of any kind against the manufacturer and/or
its authorised representatives due to damage caused
by incorrect use will not be accepted.
Observance of the operating instructions is part of
compliance with correct use.
2.2

Warnings

Each warning contains the following elements:
Warning symbol
SIGNAL WORD
Type and source of danger
Possible consequences if the danger occurs
or the warning is ignored.
f Ways to avoid the danger.
The signal words identify the severity of the danger
arising from a situation.
DANGER
Indicates an imminent danger with high risk.
The situation will lead to death or serious
injury if not avoided.
WARNING
Indicates a possible danger with moderate
risk. The situation may lead to death or seri-
ous injury if not avoided.
CAUTION
Indicates a possible danger with lower risk.
The situation will lead to minor and reversible
injury if not avoided.
138116384-V01.04.2020
Safety-related information
NOTICE
Indicates a situation that may lead to damage
to property if not avoided.
2.3

Safety notes

We have developed this product in accordance with
current safety requirements.
Please observe the following notes concerning safe
use.
2.3.1

Danger to life due to electric current

Danger to life due to contact with live components.
f Completely disconnect the station from the power
supply.
f Check that no voltage is present.
f Secure the station against switching back on.
f Only install in dry indoor areas.
2.3.2 Danger caused by inadequately qualified
personnel
Any work on this product must only be carried out by
qualified tradespeople.
As a result of their professional training and experi-
ence as well as their knowledge of the relevant legal
regulations, qualified tradespeople are able to carry
out any work on the described product professional-
ly.
User
The user must be informed how to operate the prod-
uct by qualified tradespeople.
2.3.3 Risk of burns due to hot components and
surfaces
f Allow the station to cool down before working on it.
f Wear suitable protective clothing to avoid unprotect-
ed contact with hot system components and fittings.
2.3.4

Availability of the operating instructions

Any person working on the product has to read and
apply these operating instructions.
The operating instructions must be available at the
installation location of the product.
f Hand these operating instructions and all other rele-
vant documents over to the user.
5