Warranty; Disposal - Dometic BUTTNER MT 5000 iQ Installation And Operating Manual

MT 5000iQ
Fault
The display constantly shows
a high current value (A).
The display shows a > 0 cur-
rent value (A) without active
consumers.
No remaining running time is
displayed.
12

Warranty

The statutory warranty period applies. If the product is defective, please contact your retailer or the
manufacturer's branch in your country (see dometic.com/dealer).
For repair and warranty processing, please include the following documents when you send in the
product:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Note that self-repair or nonprofessional repair can have safety consequences and might void the
warranty.
13

Disposal

Recycling products with non-replaceable batteries, rechargeable batteries or light
sources
➤ If the product contains any non-replaceable batteries, rechargeable batteries or
light sources, you don't have to remove them before disposal.
➤ If you wish to finally dispose of the product, ask your local recycling center or spe-
cialist dealer for details about how to do this in accordance with the applicable dis-
posal regulations.
➤ The product can be disposed free of charge.
Recycling packaging material
➤ Place the packaging material in the appropriate recycling waste bins wherever pos-
sible.
EN
Possible cause
Cable connection inter-
rupted.
Secret consumers.
Cable connection inter-
rupted.
Moisture formed inside the
display.
Capacity threshold values for
on/off not stored during con-
figuration or bad contact at
control cable.
Solution
Check cables for damage or
loose connections.
Trace all connected devices.
Check cables for damage or
loose connections.
Contact an authorized service
center.
Check configuration, or con-
trol cable and connections.
Warranty
15