ClearOne FlexCam User Manual
Clearone communications icam digital webcam user manual
Hide thumbs
Also See for FlexCam:
- User manual (12 pages) ,
- Installation & operation manual (10 pages) ,
- Installation & operation manual (12 pages)
Subscribe to Our Youtube Channel
Related Manuals for ClearOne FlexCam
Summary of Contents for ClearOne FlexCam
- Page 1 FlexCam ® iCam Digital User Manual ClearOne Communications, Inc. ~ 1825 Research Way, Salt Lake City, UT 84119 ~ tel 1-800-945-7730 ~ fax 1-800-933-5107...
-
Page 2: Table Of Contents
Service and support If you need additional information on how to install, set up or operate your FlexCam iCam Digital, please contact us. We welcome and encourage your comments so we can continue to improve our products and serve your needs. -
Page 3: Important Safeguards
Before operating the FlexCam iCam Digital camera, please read the entire manual thoroughly. The FlexCam iCam Digital was designed, built and tested for use indoors. Using a power supply other than the one provided or using the camera outside could damage the camera or peripheral equipment and/or create a potentially unsafe operating condition. -
Page 4: Product Overview
FlexCam iCam Digital — Introduction Application examples With simple S-video and USB connections , the FlexCam iCam Digital is the perfect addition to any classroom. You can connect to a PC or a Mac using the USB connection to add still images or movie clips to web sites, reports, and presentations. -
Page 5: Getting Started
Figure 4. Connection to an S-video display device To connect the camera to a computer 1. Connect the USB cable of the FlexCam iCam Digital to the USB input on the back of the computer. 2. Attach the power plug to the power jack on the back of the camera and plug the power adpater into the wall. - Page 6 FlexCam iCam Digital — Getting Started 4. Select Search for a suitable driver for my device (recommended). Figure 7. Search for drivers 5. Select CD-ROM drives. Figure 8. Locate drivers Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 FlexCam iCam Digital — Getting Started 6.
-
Page 7: Sofware Drivers For Macintosh
FlexCam iCam Digital — Getting Started Sofware drivers for Macintosh Before you can connect your FlexCam iCam Digital to a Macintosh, you must install the USB drivers. The drivers are found on the USB Software and Driver Disk that came with your camera. -
Page 8: Using The Camera
FlexCam iCam Digital — Using the Camera Using the Camera General usage To view images on a TV 1. Connect the camera to a TV. 2. Switch the TV to video mode by pressing the button on the TV front panel or remote control (consult your owner's manual for further instructions). - Page 9 Figure 16. Source icon 5. Click the Source icon to open the Video Source window. 6. In the Capture Source tab, select ClearOne FlexCam iCam Digital from the Select a Video Device drop down. Figure 17. Capture source 7.
-
Page 10: Photostudio For Windows
FlexCam iCam Digital — Using the Camera PhotoStudio for Windows ArcSoft PhotoStudio is an image capture program with a range of features to help you easily capture, edit and print your photos. To capture an image in PhotoStudio 1. Open... -
Page 11: Videoimpression For Macintosh
FlexCam iCam Digital — Using the Camera VideoImpression for Macintosh To capture video in VideoImpression 1. Open VideoImpression by clicking the desktop icon. 2. Click to access the video album screen. Figure 22. VideoImpression start-up screen 3. If you have installed multiple cameras, click to open the Select Source window. -
Page 12: Troubleshooting
I’ve installed the FlexCam iCam Digital, but the picture doesn’t appear. Connect the FlexCam iCam Digital to the computer using the supplied USB cable. Check to see that the video source (S-video or composite) is set correctly. Ensure that the USB port is enabled in your computer’s BIOS and in the Windows Control Panel/System Device Manager. -
Page 13: Optional Accessories
FlexLite The FlexLite is designed for use with any flexible camera. Dual flexneck top lights attach to the base of your FlexCam to provide adequate lighting for all subjects. Available in 110 V (NTSC) and 220 V (PAL) versions. Microscope eyepiece adapter Create a secure connection between your camera and microscope with the microscope eye- piece adapter. -
Page 14: Fcc Part 15/Ices-003 Compliance
Model No.: FlexCam iCam 910-171-101-PAL and FlexCam iCam Digital 910-171-102-PAL Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 FlexCam iCam Digital — Appendix FlexCam iCam Digital — Appendix Standard(s) to which Conformity is declared: 89/336/EEC "Electromagnetic Compatibility (EMC) Directive": EN 55022: 1994 (Emissions)
Need help?
Do you have a question about the FlexCam and is the answer not in the manual?
Questions and answers