Advertisement
Setting up your oven's accessories
Install oven racks and shelves.
Attach the telescopic slides to the
side racks
Obtain left hand side rack and left hand slide –
see image to identify.
L = left hand side
R = right hand side
The shaded wires indicate the wire the slide can
be mounted on. Fit slide rear clips to the rear of
wire at an angle as shown below.
Push slide front clip over wire until secured
CLICK !
1
2
3
Get it ready for use
Fix the side racks
• Insert the rear peg in the rear access hole
ensuring the peg is fully inserted.
• Then, insert the front peg into the front
access hole and push in firmly.
Fit oven shelves
• Locate detents on the side wires of the shelf as
indicated below.
• Align shelves evenly on both oven sides and slide
shelf between guide rails.
• Ensure the shelf is fully inserted, does not interfere
with oven door closure.
Detent
Advertisement
