WCP GreyT Turret User Manual page 12

GreyT Turret (11" ID) - User Guide
(Rev 1)
Step 7
Slide the 10T Steel Spur Gear and Clamping Shaft Collar onto the VersaPlanetary with
Falcon 500. Then bolt the VersaPlanetary to the assembly from Step 6 using the 3/8" OD
x 1-1/4"L Spacers and #10-32 x 1-3/4"L Bolts.
Slide the Clamping Shaft collar and 10T Steel Spur Gear up until the spur gear is resting
against the ThunderHex bearing installed in Step 2. Tighten the Clamping Shaft Collar to
keep the gear in place.
Note: The 10T Steel Spur Gear must mesh with the gear sections installed in Step 6�
Table of Contents Page 12
wcproducts.com