Advertisement
Quick Links
Q-E32003R VESA Adapter
Assembly
instructions
The VESA adapter is compatible with the following BenQ products (benq.com):
EX3203R.
The VESA adapter allows you to conveniently mount your BENQ brand monitor to a
monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and
nuts.
If you want to mount your VESA adapter directly to the wall, use suitable screws
and dowels (not included).
www.3idee.eu
Advertisement
Related Manuals for 3idee Q-E32003R
Summary of Contents for 3idee Q-E32003R
- Page 1 Q-E32003R VESA Adapter Assembly instructions The VESA adapter is compatible with the following BenQ products (benq.com): EX3203R. The VESA adapter allows you to conveniently mount your BENQ brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts.
-
Page 2: Assembly Instruction
Place your BenQ monitor securely on a soft surface. Now remove the base of your BenQ monitor by loosening and removing the cover and the 6 screws on the back. The monitor should now be ready for mounting the 3idee VESA adapter. (Figure 1) Figure 1 Step 2 Now the VESA adapter must be "levered"... - Page 3 1 washer on each screw as shown. (Figure 4) ATTENTION: Use screw pack A! Figure 4 Step 5 Now we screw the 3idee VESA adapter to the BenQ monitor with the 6x (screws + washers) we prepared in step 4 . (Figure 5) ATTENTION: Use screw package A!
- Page 4 Assembly instructions Step 7 We recommend that you carry out this step with a second person. Now take the monitor + VESA adapter and screw it to your VESA arm. (Figure 7) ATTENTION: Use screw package B! Figure 7...
-
Page 5: Safety Instructions
We wish you a lot of fun with your product. Your 3idee Team Responsible for this content: 3idee Technologies S.à r.l 5, ZA Um Lenster Bierg L-6125 Junglinster Luxembourg...