Allen + Roth ARSTDF26I Manual page 13

POSITIONING THE HEATER
This heater sets on the floor by using the Support Legs included. For convenience and efficiency, install
the heater as follows:
• In a location with easy access for operation, inspection, and service.
• In the coldest part of the room.
• A minimum of 3' (36") away from furniture and draperies.
FLOOR MOUNTING
Before installing the Support Legs to the heater base, ensure you have the following items:
• (4) Support Legs
• (12) Support Leg Screws
1. To prevent scratching, place a blanket on the floor where the heater will be placed for leg
installation.
2. Place the top of the heater on the floor.
3. Fasten the Support Legs to the heater using the Support Leg Screws (Fig. 4)
NOTE: If installing the heater directly on carpeting, tile, or other combustible material, other than wood
flooring, the heater must be installed on a metal or wood panel extending the heater's full width and
depth.
Installation (cont.)
Fig. 4—Attaching the Legs
13 Vent-Free Gas Stove User's Manual