Table of Contents
Advertisement
3. Undo the screws (2) and remove the hinge (3). Run the connector (A) through the hole in the
hinge. Hold the door while doing this to prevent it from falling.
4. Remove the top door from the middle hinge by carefully lifting it straight up. Lay the door onto a
smooth, soft surface.
5. Take the (right) cap/cover (4) from the supplied bag, and place it on the spot from with the top
hinge was removed. Remove and save the cap/cover from the other side (5) to which the hinge
will be relocated.
6. Remove the cap (6) from the left side of the top door, and pull out the connector (A). Then,
remove the cap (7) from the right side of the top door. Place the cap (7) on the left side of the top
door, and place the cap (6) on the right side of the top door.
8
Advertisement
Table of Contents
