Table of Contents
Advertisement
Wire Bottle Rack
Some models also feature a wire bottle rack. It is protected against
being inadvertently pulled out. It can only be pulled out when it is
empty. To pull it out, lift it slightly at the back and pull it towards you.
Place the bottle rack so that the length of the bottles does not hinder
proper closing of the door.
The holder can take a maximum load of nine 0.75-litre bottles or 13
kilograms of total weight – see label on the right side in the appliance interior. Cans may also be
placed on the bottle rack (lengthwise or crosswise).
Fruit and Vegetable Bin with Humidity Control
The bin at the bottom of the refrigerator is intended for storing fruit and vegetables. It provides
humidity and prevents the stored food from drying out. The bin has integrated humidity regulator
which allows you to set the humidity level inside.
Slider position to the right: closed vents, higher humidity in the bin.
Slider position to the left: open vents, lower humidity in the bin.
If you observe droplets accumulating below the glass shelf, open the vents and wipe the shelf (see
chapter TROUBLESHOOTING).
To remove the bin, pull out the bin as far as it will go. Then, lift the front part and pull it out
completely.
18
Advertisement
Table of Contents
