Siemens SIMATIC S7-1500 Manual page 21

Product overview
2.3 Hardware properties
Properties
CPU 1511-1 PN has the following technical properties:
Property
CPU display
Supply voltage
PROFINET IO
PROFINET interface (X1 P1
R and X1 P2 R)
Operation of the CPU as
• IO controller
• I-device
Accessories
You can find information on "Accessories/spare parts" in the S7-1500, ET 200MP system
manual (http://support.automation.siemens.com/WW/view/en/59191792).
20
Description
All CPUs of the SIMATIC S7-1500 product series feature
a display with plain text information. The display pro-
vides information on order numbers, firmware version
and serial numbers of all connected modules. In addi-
tion, you can set the IP address of the CPU and carry out
further network settings. The display shows occurring
error messages directly in plain text.
In addition to the functions listed here, a multitude of
other functions that are described in the SIMATIC S7-
1500 Display Simulator are shown on the display.
The 24 V DC supply voltage is fed in via a 4-pin plug
located at the bottom of the CPU.
The interface has two ports. In addition to basic
PROFINET functionality, its also supports PROFINET IO
RT (real time) and IRT (isochronous real time).
IO controller:
•
As an IO controller the CPU addresses the connected
IO devices
I-device:
•
As an I-device (intelligent IO device) the CPU is as-
signed to a higher-level IO controller and is used in
the process as an intelligent pre-processing unit of
sub-processes
Additional information
• S7-1500, ET 200MP system man-
ual
(http://support.automation.sieme
ns.com/WW/view/en/59191792)
• SIMATIC S7-1500 Display Simula-
tor
(https://support.industry.siemens
.com/cs/ww/en/view/109761758)
• Chapter Connecting up (Page 30)
• S7-1500, ET 200MP system man-
ual
(http://support.automation.sieme
ns.com/WW/view/en/59191792)
PROFINET function manual
(https://support.industry.siemens.co
m/cs/ww/en/view/49948856)
CPU 1511-1 PN (6ES7511-1AK02-0AB0)
Equipment Manual, 05/2021, A5E40869673-AB