Charger Socket - Permobil R-net LCD color User Manual

R-net LCD color
2.2

Charger socket

This socket should only be used for charging or locking the
wheelchair. Do not connect any type of programming cable into this
socket. This socket should not be used as a power supply for any
other electrical device. Connection other electrical devices may
damage the control system or affect the wheelchair's EMC
(electromagnetic compatibility) performance.
NOTICE
Use only the supplied battery charger
The wheelchair's warranty will be voided if any device other than the
battery charger supplied with the wheelchair or the lock key is connected
via the control panel charger socket.
12
R-net control panel with LCD color display
Figure 2. Charger socket