Permobil R-net LCD color User Manual page 19

R-net LCD color
2.5.7 Restart
When the control system requires a restart, for example after a
module re-configuration, this symbol will flash.
2.5.8 Control system temperature
This symbol means that a safety feature has been triggered. This
safety feature reduces the power to the motors, and automatically
resets when the control system has cooled down. When this symbol
occurs, drive slowly or stop the wheelchair. If the control system
temperature continues to increase it can reach a level where the
control system must cool down, at which point it will not be
possible to drive any further.
R-net control panel with LCD color display
Figure 19. Restart required.
Figure 20. Control system temperature.
19