Permobil R-net LCD color User Manual page 14

R-net LCD color
2.3.4 Mode button
The mode button allows the user to navigate through the available
operating modes for the control system. The available modes depend
on programming and the range of auxiliary output devices
connected to the control system.
2.3.5 Profile button
The profile button allows the user to navigate through the profiles
available for the control system. The number of profiles available
depends on how the control system is programmed.
2.3.6 Hazard warning button and LED
Only active if the wheelchair is provided with lights.
This button switches the wheelchair hazards lights on or off. The
hazards lights are used when the wheelchair is positioned such that it
constitutes an obstruction for others. Push the button to switch the
hazard lights on and push it again to switch them off. When
activated, the indicator LED will flash in sync with the wheelchair's
indicators.
14
R-net control panel with LCD color display
Figure 6. Mode button.
Figure 7. Profile button.
Figure 8. Hazard button and LED