Audio Characteristics; Analog Performances; Frequency Converter Performance (Src); Connectors - Digigram ALP222e User Manual

User Manual – ALP222e

13.4 Audio characteristics

Sampling frequency
CAN/CNA resolutions
Audio formats supported

13.5 Analog performances

Measurements taken at Fs=48 kHz, with filter on band 22 Hz-22 kHz.
Frequency response
Phase shift between tracks
Signal to Noise Ratio
THD + Noise
Crosstalk

13.6 Frequency converter performance (SRC)

Maximum frequency
Frequency ratio
THD + noise 1 kHz to –2 dBfs

13.7 Connectors

Internal connectors
Programmable from 8 to 192 kHz
24 bits/192 kHz
PCM: 16, 24, 32 bits, Float IEEE754
@48 kHz, 20 Hz - 20 kHz - Inputs: +/- 0.5 dB Outputs: +/- 0.08 dB
Inputs: < 0.01° (@1 kHz)
Outputs: < -7.5° (@1 kHz)
Inputs: >110 dBA (>108 dB unweighted)
Outputs: >115 dBA (>112 dB unweighted)
Inputs: <-96 dB @18 dBu (1 kHz)
Outputs: <-101 dB @18 dBu (1 kHz)
Inputs: -111 dB @1 kHz/-110 dB @15 kHz
Outputs: -130 dB @1 kHz/-111 dB @15 kHz
Inter-card synchronisation
192 kHz
1:8 to 7.5:1
<-130 dB
58