Creating, Saving And Loading Setting Sessions; Updating The Firmware - Digigram ALP222e User Manual

User Manual – ALP222e

9.5 Creating, saving and loading setting sessions

The current configuration of all settings defined in ALP-X Manager can be saved. Go to the File menu
and select "Save session as".
To load a settings configuration, go to the File menu and select "Open session".
To create a new settings configuration from blank settings, go to the File menu and select "New
session".
To save the settings during an existing session, go to the File menu and select "Save".
9.6 Updating the firmware
The ALP card on-board firmware may have to be upgraded, and updates can be supplied by
Digigram and prove necessary.
To perform an update, click on the button
on the screen capture below.
on the right of the "Firmware version" field, as shown
The ALP card is selected from the list of cards detected.
Click on the "Browse" button and select the file matching the new
firmware to be applied (file with extension ".bin").
27