Table of Contents
Advertisement
User Manual – ALP222e
Sample size
This setting defines the format of samples exchanged between the
application and the card driver.
Enable Direct Monitoring Control
Tick this setting to authorise an ASIO application to drive the zero latency
hardware monitoring of inputs towards outputs. If an application
monitors software, this causes latency between the input signal
and the output signal, linked to the ASIO buffer sizes.
Boost Asio priority
This option allows the system to run the ASIO process with high
priority, thereby increasing the reliability of this process. Caution,
however, this can make other processes unstable.
Audio errors
This section is used to visualise current errors for playback and recording
via the ASIO driver. Errors frequently reflect too small an ASIO
buffer size for the system's possibilities. Should they occur, then
the buffer size needs to be increased until there are no more
errors.
Sync status errors reflect clock synchro errors (AES11 external clock,
WordClock or inter-card synchro).
Error counters can be reset to zero by clicking on the RESET button.
Lastly, a time counter displays the time elapsed since the last counter
reset.
31
Advertisement
Table of Contents
