Updating The Driver Version; Updating The Firmware - Digigram ALP222e User Manual

User Manual – ALP222e

7.2 Updating the driver version

If a driver version for the ALP card has already been installed, and you want to install another
version, first uninstall the current driver version (see chapter
Windows"), and then install the new version by double clicking on the driver installation file "ALP-X
Kit vxx.exe" (see the detailed procedure in the hereinabove chapter
7.3 Updating the firmware
The ALP card on-board firmware may have to be upgraded, and updates can be supplied by
Digigram and prove necessary.
Updating the firmware can be done from the ALP-X Manager GUI (see chapter
CARD UNDER WINDOWS VIA THE ALP-X MANAGER
settings. There is no need to install it if
no application reliant on the ASIO
interface is used.
The driver is installed by default in the folder
"C:\Program Files (x86)\Digigram\ALP-X".
To change this folder, click on Browse and
select a new destination.
Click on Install to continue with the
installation.
The driver and selected components are
being installed.
"Uninstalling the driver under
"Very first
APPLICATION).
installation").
CONFIGURING THE
14