Managing The Routing And Mixing Of Input Signals - Digigram ALP222e User Manual

User Manual – ALP222e
Mute
The mute button has an effect on the two channels of a stereo pair.
A click on this button sets the two channels in mute mode, and it turns
red.
Pairing channel strips
To set a common level for several input channel strips, validate the button
on each channel strip. The gain setting on one channel strip is then
applied to all the paired channel strips.
Pre or post fader vu-metres
The blue LED button allows selecting if the Vu-meter displays the signal
level before or after the digital gain set via the fader.
To select pre or post fader Vu-meter, click on the blue LED button on the
right of the Vu-meter bar(s), and select the mode.

9.3 Managing the routing and mixing of input signals

Click on the icon to access the "Matrix" view which is used to mix/route input signals towards
the outputs
The mixer can mix all or some of the input signals towards each output. Each output can therefore
receive its own mix of inputs.
24