User Manual – ALP222e
9.2 Managing input and output levels
Note that after the first installation of the card, the default gain settings are as follows:
Input analog gains are set to 0 dB (+24 dU -> 0 dBfs).
●
Digital input and output gains are set to 0 dB
●
The 8x8 routing matrix is configured this way:
●
- Play 1-2 routed to outputs 1-2
- Play 3-4 routed to outputs 3-4
- Inputs 1-2 (analog) routed to Rec 1-2
- Inputs 3-4 (AES2) routed to Rec 3-4
The other routing points of the matrix are muted.
Click on the
icon to access the "I/O Monitor" view which is used to adjust audio levels.
The onboard mixer features two categories of audio inputs and audio outputs
Physical inputs (analog and AES3)
●
Software playback inputs. They correspond to the playback devices exposed by the driver to
●
the applications.
Physical outputs (analog and AES3)
●
The clock source used at a given moment is displayed in
the "Sync Source" field, and its frequency value is given
by the "Sampling Rate" field.
21