Advertisement
Available languages
Available languages
Assembly instructions
For product codes: 131 3736, 131 3749, 131 3752,
131 3765, 131 3778, 131 3781, 131 3794, 131 5602 & 131 5615
'Style E' changing room bench (product code 131 3736)
Start by checking that all parts are present. The quantities will depend on the number of benches ordered:
Wall bracket (quantity depends on the bench length)
①
Three seat slats per bench
②
Backrest
③
M10×120 hex-head wood screws (DIN 571), M10.5×25×1.5 washers (DIN 944) and S14 wall plugs
④
Spax5×55 round-headed screws
⑤
M8×60 countersunk screws (DIN 7991)
⑥
The 'Style E' changing room bench is a wall-mounted variant.
A hook rail and spacers (product codes 131 5602 and 131 5615) are optional extras.
Please note:
•
The wall must be of B 25 concrete quality, i.e. reinforced concrete or similar masonry. If you do not know the
specific material, please consult a specialist. The fixings must be able to withstand a tensile force of 0.50 kN.
•
The seat slats and backrest do not have pre-drilled holes.
The undersides of the seat slats are labelled.
•
Figure 6: 'Style E' changing room bench
Figure 7: Assembling the 'Style E' changing room bench
Version 10/2021 | Page 5
Advertisement
