Sdlt Tape Cartridge Handling And Storage - Compaq StorageWorks ESL9000 Series Reference Manual

6-12 Compaq StorageWorks ESL9000 Series Tape Library Reference Guide

SDLT Tape Cartridge Handling and Storage

For longer life of recorded or unrecorded tape cartridges:
I
Store tape cartridges in a clean environment.
I
Use tape cartridges in temperatures between 50°F to 104°F (10°C and 40°C).
I
If a tape cartridge has been exposed to extreme heat or cold, stabilize the tape cartridge
at room temperature for the same amount of time it was exposed for up to 24 hours.
I
Do not place tape cartridges near electromagnetic interference sources, such as
terminals, motors, and video or X-ray equipment. Doing so may cause data on the tape
cartridge to be altered.
I
Store tape cartridges in a dust-free environment where the relative humidity is between
20 percent and 80 percent. For longer tape cartridge life, store the tape cartridge at 40
percent to 60 percent relative humidity.
If a tape cartridge is dropped or damage is suspected, gently shake the tape cartridge:
I
If it rattles, it is damaged. Restore the data on the tape cartridge by some means other
than by using the SDLT 110/220 tape drive, and discard the damaged tape cartridge.
I
If it doesn't rattle, check the tape leader inside the cartridge. To do this, open the door
on the rear of the tape cartridge by releasing the door lock. The tape leader should be
visible at the top-left of the tape cartridge.
Refer to the Compaq SDLT 110/220 Drive Reference Guide for more information.