Safety Instructions; General Safety Instructions - Siemens SIMATIC IPC BX-39A Operating Instructions Manual

Hide thumbs Also See for SIMATIC IPC BX-39A:
Table of Contents

Advertisement

Safety instructions

2.1

General safety instructions

The installer of the system is responsible for the safety of a system in which the device
is integrated.
There is a risk of malfunction which could result in death or serious injury.
• Ensure that only suitably qualified personnel perform the work.
Risk due to electric shock
Risk of electric shock
The on/off button and on/off switch do not fully disconnect the device from the supply
voltage.
There is also a risk of fire if the device or connecting lines are damaged.
• Always fully disconnect the device from the supply voltage before performing work on
• For control cabinet mounting: Use a central, easily accessible AC circuit breaker close to
• When you install the device, make sure that the power supply connector is easily
Risk of lightning strikes
Risk of lightning strikes
A lightning flash may enter the mains cables and data transmission cables and jump to a
person.
Death, serious injury and burns may result.
• Disconnect the device from the power supply in good time when a thunderstorm is
• Do not touch power cables and data transmission cables during a thunderstorm.
• Keep sufficient distance from electric cables, distributors, systems, etc.
SIMATIC IPC BX-39A
Operating Instructions, 07/2022, A5E50715883-AA
WARNING
WARNING
the device or when the device will not be used over an extended period of time.
the device, if possible.
accessible.
DANGER
approaching.
2
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic ipc px-39a pro

Table of Contents